Select Page

A Series

ICEpower // Products // Other // A Series

Small size. Great versatility.

The ICEpower A Series consists of three high-performance general-purpose class D amplifiers. Essentially the same as the amplifiers on the ASP modules, they are available in power variants of 250 W, 500 W and 1000 W.

They can be used on their own, powered by a linear power supply, or they can be powered by the hanger bus from the modules in the ASP series for creating 2 channel amplifiers, 2-way and 3-way active speakers.


Below you can see the application possibilities for the A Series. If you have any doubt or questions, please contact our sales team.

Active studio monitors


Hifi amplifiers

Professional self powered PA speakers and line arrays

Compare our portfolio of A Series

Feature Set Summary

250A 500A 1000A
Balanced input and output
Soft start-up and mute/de-mute
Standby mode
Under-voltage protection
Full 20Hz – 20kHz audio bandwidth*
Mechanically rugged construction
(Tested for 70G shocks in all directions)
Pre-approved for Safety, EMC and RoHS compliance

Key Performance Parameters

250A 500A 1000A
Amplifier Output Power per channel
(1 % THD+N, 20 Hz – 20 kHz)
250 W (2.7 Ω)
110 W (8 Ω)
600 W (4 Ω)
300 W (8 Ω)
1000 W (4 Ω)
600 W (8 Ω)
Minimum load impedance 2 Ω 2 Ω 2 Ω
Maximum amplifier efficiency
Maximum total amp+psu efficiency 93 % 93% 93 %
Supply voltage input (Selectable) 115-230 VAC 115-230 VAC 115-230 VAC
Peak output current >25 A >45 A >50 A
Dynamic range 112 dB 117 dB 120 dB
Amplifier maximum output voltage per channel 69.3 V 89.4 V
Output referenced idle noise (A-weighted) 85 μV 75 μV 80 μV
THD+N 1 W/1 kHz 0.015 % 0.006 % 0.008 %